Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/includes/class.layout.php on line 164

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/includes/class.layout.php on line 167

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/includes/class.layout.php on line 170

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/includes/class.layout.php on line 173

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/includes/class.layout.php on line 176

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/includes/class.layout.php on line 178

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/includes/class.layout.php on line 180

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/includes/class.layout.php on line 202

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/includes/class.layout.php on line 206

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/includes/class.layout.php on line 229

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/includes/class.layout.php on line 230

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/includes/class.layout.php on line 231

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/includes/class.layout.php on line 321

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/includes/class.layout.php on line 321

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/includes/class.layout.php on line 321

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/includes/class.layout.php on line 321

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/admin/class.options.metapanel.php on line 56

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/admin/class.options.metapanel.php on line 56

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/admin/class.options.metapanel.php on line 56

Warning: Creating default object from empty value in /nfs/c03/h03/mnt/56986/domains/pixsylated.com/html/blog/wp-content/themes/platform/admin/class.options.metapanel.php on line 49
Controlling Canon Speedlites as Slaves—Part One: 600EX-RT as Radio Slave | PixSylated

There are two options for wireless communication built into the 600EX-RT Speedlite system: radio OR optical. If you are using only 600EX-RTs as slaves, then take advantage of the radio system. The range is longer than optical wireless and you won’t have to worry about the signal being blocked by opaque surfaces. If you are using the 600EX-RT with earlier Canon Speedlites (500- and 400-series Speedlites), then you must operate the 600EX-RT in optical wireless (either as a master or a slave).

Notice that I said radio OR optical. It is not possible to send instructions to a 600EX-RT via radio and then have it optically transmit those instructions to 500- and 400-series Speedlites. That would be radio AND optical. Pick one wireless mode OR the other. If you want to use a 600EX-RT with non-radio Speedlites, then the 600EX-RT must be in Optical Wireless.

Setting Up the 600EX-RT Speedlite as a Radio Slave—Four Steps

There are four steps to using a 600EX-RT Speedlite as a radio slave. Think A-C-I-G and you’ll remember them.

  • Activate the 600EX-RT as a radio slave
  • Set the Channel of all slaves to match the master (Auto or Channels 1-15)
  • Set the Wireless ID of all slaves to match the master (0000 to 9999)
  • Assign each slave to a Group (five options A-E)
Step 1. Activate Each Speedlite as a Radio Slave

(L-R) 600EX-RT Wireless Mode button, Slave & Master icons, Radio Wireless icon, Optical Wireless icon

    • Find the Wireless Mode Button. It’s on the left side of the Speedlite. Look for the sideways flashbolt, which is Canon’s symbol for wireless flash.
    • Press the Wireless Mode button repeatedly. The unit will cycle Solo > Radio Master > Radio Slave > Optical Master > Optical Slave > Solo.  [Bonus tip 1: if you only shoot radio wireless or only optical wireless, use Personal Function 06 to deactivate the wireless mode that you don’t use. This way you can’t accidentally activate a 600EX-RT in the wireless mode that you never use.]
    • Look for the word Slave appear on the LCD. [Bonus Tip 2: Use Personal Functions 02-04 to specify whether the color of the LCD is orange or green in solo, master, and slave modes. I use green for solo and master and orange for slave.]
    • Look for the radio wireless icon in the upper right corner of the LCD. This icon tells you Radio or Optical.
Step 2. Set the Channel of All Slaves to Match the Master

Channel and Wireless ID settings are made on the Menu 3 screen of the 600EX-RT

    • The factory default channel is AUTO. In radio wireless, the 600EX-RT has 15 channels. If the Master is in AUTO, then the Slaves must be in AUTO. If the Master is set to a specific channel (1-15), then the Slaves must be set to that same channel. Industrial and corporate settings may have wireless devices that are using the same 2.4 Ghz channels used by the 600EX-RT. So, switching channels may extend the range at a particular location. (In another post, I’ll cover how to use the channel scanner that is built into the 600EX-RT and ST-E3-RT systems.)
    • Look at the Channel ID—The channel ID appears on the LCD just below the Radio/Optical icon in the upper right corner. Again, like a walkie-talkie, the channel on the master and the slave(s) must be the same.
    • Head to Menu 3. Tap-tap-tap on the Menu button (rightmost of the four interactive buttons) until you see Menu 3 appear above the button
    • To set the Channel
      • press the CH button
      • turn the Select wheel until you get to the desired channel (AUTO is one click to the left of Channel 1)
      • press the Set button in the center of the Select wheel to confirm your selection
Step 3. Set the Wireless ID Code of All Slaves to Match the Master

Wireless ID Code set-up on the 600EX-RT

    • Set the Wireless ID Code. In addition to the channel, you must also specify a Wireless ID Code on your 600EX-RTs (and the ST-E3-RT Transmitter, if you have one). The factory default code is 0000. The purpose of the Wireless ID is to allow multiple Speedliters (literally up to 10,000) to use the same radio channel.
    • To set the Wireless ID Code:
      • press the ID button (immediately right of the CH button on Menu 3)
      • turn the Select Wheel until the digit you want to change is underlined
      • press the Set button at the center of the Select Wheel (the number will backlight on the LCD, as shown above)
      • turn the Select Wheel to change to the desired digit
      • press the Set button to confirm your selection
      • turn the Select Wheel again so that the next digit you want to change is underlined
      • repeat the above steps until all the digits have been changed as needed
      • when you have the desired code set, press the Return button (the rightmost of the four interactive buttons, look for the U-turn symbol above). Now you’re back at Menu 3.

Left: red Link Light indicates that master and slave are not communicating. Right: green Link Light indicates that master and slave are working together.

    • Check that the Link Light is green. When the Channel and Wireless ID settings are correct between master and slave, the Link Lights will glow green.
    • If a Link Light is red, check the following:
      • master Speedlite is turned on and set as a Radio Master
      • slave Speedlite is turned on and set as a Radio Slave
      • Channel setting on the slave matches that on the master
      • Wireless ID setting on the slave matches that on the master
Step 4. Assign Each Slave to a Group

The Group icon and Group button on the 600EX-RT.

    • Assigning slaves to different Groups gives you the ability to operate those Speedlites at different power settings. In Canonlandia, the master Speedlite is always a member of Group A. So, there is no option to set the Group on a Master. If you have a two-light shoot with the Master Enabled (which I wrote about here), then  assign your slave Speedlite to a Group other than A so that you can control its power independently of the master’s power setting. (If you are shooting in ETTL with ratios, then the slave should be in Group B.)
    • There are five Groups (A–E) in Canon’s radio wireless system. Assign all the Speedlites doing the same job to the same Group. For instance, when I use multiple Speedlites inside an Apollo softbox, all of those units are assigned to the same Group.
    • To change the Group assignment on a slaved 600EX-RT, head to Menu 1 and look for the Gr icon. Tap-tap-tap on the Gr button until the desired Group ID appears in the box on the left side of the screen.

A Quick Word About the New Group Mode

Group Mode in Radio Wireless enables the use of different modes at the same time. Group Mode also allows you to turn groups on/off individually.

    • Canon now uses the word Group in two ways. The traditional way, as discussed above, deals with the assignment of slaves to specific groups so that they can fire at different power levels. The second usage, introduced with the 600EX-RT, refers to a new Speedlite Mode (joining ETTL, Manual, Multi, and External).
    • If you have a 2012 or newer camera model (1D X, 5D Mark III, 6D, T4i/650D, EOS M) you can shoot radio wireless in Group Mode—which gives you the ability to turn individual groups on/off and to assign the mode of each group independently (meaning you can have slaves in ETTL, Manual, and/or External Auto all at the same time).
    • If you have a pre-2012 camera model, the Group Mode settings appear to operate on the LCD of the 600EX-RT master Speedlite and the ST-E3-RT transmitter, but…when you fire the camera the Speedlite mode defaults back to ETTL and all of the the flashes fire at the same power level. This is due to the fact that pre-2012 cameras do not know about radio.

Changing the Mode and Power of Slave Canon Speedlites

To change the mode and power of a slave Speedlite, use the Mode and Power buttons on the master. Shown here: the ST-E3-RT Transmitter.

The master is the place you change the mode and power setting of your slaved Speedlites. Read that sentence repeatedly until the message sinks in. Once you’ve gone through the four-step A-C-I-G checklist to set up your slave Speedlites, you control their mode and power settings via the master (either a 600EX-RT or the ST-E3-RT Transmitter).

You won’t see the change on the slaves until you press the shutter button. The changes are transmitted from the master to the slaves the next time you press the shutter button. Then, in an instant, the slaves change their settings as instructed and fire at the proper moment.

This is the great advantage of using the wireless system built into your Canon gear. You have full control from the convenience of your camera LCD (if you don’t know how to do this, read this post on accessing the Speedlite menu on your camera). If you want to run your slaves in Manual, tap the Mode button on the Master and dial the power in directly. If you decide that ETTL is better for the specifics of the shoot, then tap the Mode button on the Master again and use Flash Exposure Compensation to fine-tune the power setting of the slaves. (PocketWizards and other types of radio triggers break this on-camera control, which is why I seldom use them with Speedlites.)

600EX-RT Speedlite Current price on Amazon • Current price on B&H

ST-E3-RT Speedlite Transmitter Current price on AmazonCurrent price on B&H

55 Responses to Controlling Canon Speedlites as Slaves—Part One: 600EX-RT as Radio Slave

  1. Great stuff as always Syl, I’m loving the 600 EX-RT, I use 3 controlled via a ST-E3. It’s a wonderful system that’s a pleasure to use.

  2. Tony Dunn says:

    Thanks, Syl. I wish I’d seen this post a week ago. I just bought 3 600EXs and the ST-E3 and spent the better part of an hour trying to figure out what your post explained in 5 minutes.

  3. Can the settings be saved. In other words, if I use three 600ex flashes to shoot a home (I am a real estate photographer) and pack up, go to the next property. Do I need to re-sync or does it save my settings so I can in pack and start shooting?

  4. […] • Part One: 600EX-RT as Radio Slave • Part Two: Fundamentals of Optical Wireless (this part) • Part Three: Setting Up Speedlites as Optical Slaves (coming) [Note: In this series, I am writing about the master/slave system built into Canon Speedlites. There is another type of optical slave that is common in studio lighting. It fires the strobe when it senses a flash of bright light, but all changes to power, sync, etc. must be made manually on the unit.] […]

  5. Brian says:


    I cannot get the option of assigning my 600EX as slave during radio Tx. Please help

  6. Giovani R Pop says:

    I have a 7d purchased in 2010 and a 5d mark II purchased in 2012. I also have 3 580ex II. Should i switch to the 600ex or not? Money is not a issue. Could I have full control with these two cameras or not? What would you recommend? Thank you! Gio

  7. […] Arena has mentioned this in his on-line instructions covering these new radio controlled units! (Part 1 and Part 2) This allowed me to meter the flash power outputs just like you normally would with […]

  8. Repsac says:

    How easy is it to switch on/off the slave groups?
    E.g. when shooting in the direction of your own slave, you may want to quickly turn it’s group off.

    • Syl Arena says:

      With the 600EX-RT and a 2012 or newer camera model, you can use Group Mode — which enables you to turn specific groups on /off. With earlier Speedlites / cameras, the most you can do is dial the power down in Manual to 1/128 for the group that you want to minimize.

  9. Mobius Strip says:

    Thanks for this post, Syl. A question:

    I’m using a 5D Mk II and one on-camera 600EX (master, obviously)and one off-camera 600EX (slave). Connection is radio wireless.

    Q: What’s the difference between setting the Master to ‘ALL’ and using flash exposure compensation to control power, and setting the Master to ‘RATIO’ and controlling power right from the Master?


    • Syl Arena says:

      ALL fires all the slaves groups at the same power level. RATIO allows the individual slave groups (A,B,C…plus D & E on the 600EX-RT) to be adjusted in relation to each other. Flash Exposure Compensation (FEC) will apply to the entire system. So, you can apply FEC to ratio-controlled slaves. In the case of having one off-camera light, ALL + FEC is the simplest way to go.

  10. Syl, I’m still confused with using two 600exrts with a 5DM2. If I have one on my M2 and one setup remotely, can I use these in radio mode? More importantly can the master that is on the M2 remotely control the power on the other one?


    • Syl Arena says:

      The only limitation with using the 5DM2 and the 600EX-RTs is that you have to control the system via the LCD on the master Speedlite (rather than via the LCD on the newer generation of cameras, such as the 5DM3). Yes, the Canon wireless system allows you to control the power of slaved Speedlites via the master.

  11. Sergio Fialho says:

    Dear Syl,
    I just bought a 600ex-rt and a 70d. Is it possible to use the built-in flash of the camera to trigger the speedlite?
    Could you give me some advise?
    Thanks from Brasil!

    • Syl Arena says:

      @Sergio –

      The 70D is happy to control a 600EX-RT via the pop-up flash. Make sure that your Speedlite is set to Optical Wireless. Also, turn the body so that the red panel on the front is facing the camera. The optical slave sensor is just above the red panel. Then turn the head of the flash back to your subject.

  12. prasad menon says:

    in GR setting, 600ex rt flash in slave and ettl mode, st-e3-rt doesn’t transmit FEC to the flash though the flash fires(correct matching group, channel and mode)
    many thanks.

  13. Larry B says:

    How to set ST-E3-RT as master & 600 EX-RT as slave using High Speed Sync. Camera is 5D Markiii I cannot find the settings. High Speed Sync on the 600 EX-RT but not on the ST-E3-RT

  14. Frank Weber says:

    I have a 1d mark IV and would like to use 600exrt on camera, ETTL and a 600exrt slaved in manual mode. I do not want to adjust the slave, just have it in manual. IS the pre 2012 camera getting in my way….

    I have the Calumet QUAD plus that I have used with my 580’s I can drop the 600’s on them.
    Thank you!!!

  15. Ravi says:

    Great article. Thanks so much for putting this up (and answering questions.) 🙂

    I have a 6D and think I want to buy a few 600EX-RT’s. Would I also need a ST-E3-RT on the camera or does the 6D not need a transmitter?

    Thanks again!

    • Syl Arena says:

      @Ravi – If you want to control the 600EX-RTs via radio, you will need either a 600EX-RT Speedlite or the ST-E3-RT Transmitter in the hotshoe of your 6D.

  16. Stu Nowlin says:

    Your observations are real time savers! Thanks! I have 4 600EX-RTs controlled by my ST-E3-RT and mostly use Group settings. I just got 2 Profoto B1 units and the Air TTL Remote to use studio flash (500WS) and ETTL-II. It also works as advertised. I would like to use the Air TTL Remote on camera to control the B1s and optically trigger a couple of 600s as accent / hair lights via the B1’s flash output. Can this be done using the B1’s flash as a trigger?

  17. Stu Nowlin says:

    The Canon white paper on optical states that you can only use the ST-E2 to control the 600EX-RT unit in optical mode. I tested this and found that the optical setting (the thunderbolt) with the 600s only allows ETTL, not manual or any other setting. That is, it only recognizes signals from a Canon device and from no other. That is unacceptable. I can use my ST-E3-RT and Canon lights and also use my Profoto B1 stobes in optical manual mode and get the Profotos to fire. Further, I can control the Profoto units with the Air TTL-C remote OFF CAMERA to control light output. Canon does not allow this. What it means is that I will spend more money for Profoto units rather than Canon equipment. Stu

    • Syl Arena says:

      Stu – I’m not familiar with the white paper you referenced. 600EX-RTs can be controlled in optical wireless by many different optical masters: 600EX-RT, 580EX II, 580EX, 550EX, and the Macro Twin- and Ringlites. Manual mode is available on all of these optical masters. Keep in mind that, even in Manual mode, there is a pre-flash sequence prior to the shutter opening. This pre-flash is not ETTL. Rather, it is how the optical master communicates with the slave Speedlites. The pre-flash is the optical transmission of the instructions to the slaves. That said, I think the combination of the ST-E3-RT with a 600EX-RT as a radio slave is a great combination with studio strobes. For an all-Profoto system, the Air controller is a great solution.

      • Stu Nowlin says:

        Thanks for the reply! The paper is on the Canon Digital Learning Center, “QuickGuide to Speedlite 600EX-RT Optical Wireless Flash Setup”. It confirms what you said about using other Canon flash units and the ST-E2 to trigger the 600s optically. That is not my desire. I want to fire the 600s in slave mode in manual. I want accent / hair lights along with studio strobes. This is not possible with the 600s. Slave mode (thunderbolt symbol active) only allows ETTL, or another Canon device to trigger them. There is no manual mode that would allow the optical sensor to sense any other flash and fire. You do not need a pre-flash in manual. You do need a light meter. And then just set the power level as needed (1/64th, 1/32, etc.). The PocketWizard AC3 works this way in manual. Just set the power level and test it. Then shoot.

        • Syl Arena says:

          Stu –

          What you are looking for as a way to fire a Canon Speedlite with an optical slave eye, such as the ones built into studio strobes. Canon does not include this circuit/sensor in their Speedlites. They can be added on externally. Just be sure that you get an adapter that is made specifically for Canon Speedlites.

          • Stu Nowlin says:

            Again I am indebted to you! I have been playing with Profoto B1 units that are ETTL-II capable. They are fabulous. You can do a test shot with ETTL-II, then switch to manual mode which preserves these ETTL-II settings and re-set groups A, B or C as needed in manual. Then shoot all of the, say, alter shots with this setting so that when the bride turns the white dress reflectance does not throw off the exposure. I have been using Groups with my speedlites with similar results. In my opinion the Groups setting is the preferred way to work. You can turn off any group(s) and see what the light contribution is and go from there. I love it.
            I will try to find a Canon specific sensor for my 600s that will allow me to use them in manual with my B1s (but obviously not in ETTL-II since the pre-flash would fire my 600s too soon.)

  18. eugene sarigumba says:

    i just started using the 600 ex rt with the st e3 rt transmitter. Everything is working fine…but in your article, you said any changes on the master will show up on the slave after you press the shutter button. This isn’t working for me. I change the flash output level and the focal length of the lense, but neither of those new settings are reflected in the slave after pressing shutter. Though the flash output still reflects the changes made on the master, it just doesn’t show it on the lcd of the slave.
    I’m I doing something wrong here? Thanks.

    • Syl Arena says:

      @Eugene – The Zoom setting on the slaves has to be set directly. You cannot change the Zoom setting from a master Speedlite or transmitter. If you are in ETTL, then there will not be a power setting shown on the slaves. If you are shooting in Manual, then there should be.

  19. […] I wrote a detailed guide to setting up the 600EX-RT as a radio slave here on PixSylated. […]

  20. danielyn says:

    Hi, i have the 600 ex-rt and a canon 70D camera, is there a specific wireless codes for each 600 ex-rt?thank you.

    • Syl Arena says:

      Danielyn – If you are using the 600EX-RT Speedlite or ST-E3-RT Transmitter to control other 600EX-RTs as slaves, then yes they all must have the same wireless ID. This enables several shooters to use the same radio channel without controlling each other’s gear. If you are using a single 600EX-RT in the hotshoe of your camera, then you do not need to worry about setting the wireless ID.

  21. Rick Rios says:

    I have several 600exs and a ST- E3. I prefer to utilize a 600ex as a master to take advantage of it’s infrared beam to assist with focus in low light situations. I would like to use the mounted 600ex for fill lighting, but i can’t seem to be able to adjust the FEC on the 600ex that is being used as a MASTER. The only mode FEC Seems to work is in ETTL. I still shoot with a 7D and can control every 600ex that is off camera in MANUAL mode. Your advice is highly appreciated. Thank you.

  22. Piper says:

    I just opened my new set of flashes today (2 600EX-RTs and 1 ST-E3-RT transmitter). I set up the transmitter on my hotshoe and one of the 600’s off to the side. I followed all the instructions (by the way — nice job on those!) — set the channel, the ID, set the 600 to slave, saw the green communication light between the two, etc and could NOT get the flash to fire. I then thought there may be a problem with the 600 and added the second 600 to a different group. Again, had all green communication lights but no firing of either flash. I now started to suspect the problem was with the transmitter… I also wasn’t able to get to the flash menu screens on the camera (6d) but wasn’t sure if I was supposed to be able to access that or not with the transmitter in the hotshoe. I then finally thought to try the obvious — reseat the transmitter. Voila! Flash menus on the camera are now accessible and both flashes work now as expected.
    Moral: Just as in the past, if things are not working as expected — double check the seating in the hotshoe!!!!!

  23. Dan says:

    Thank you. Amazing article. Well written. This has given me a jump start to off camera flash with 600 ex. I’m in to indian wedding photography this is game changer for me. Thank you for you research. It’s really helpful indeed.

  24. I keep running into the problem of slow recycle times? I have them ( 3) and the transmitter set up for radio and they work well. However, the recycle time is SLOW! I have them on Quantum Turbo 3’s and the CF 12 set to 1, as directed, but it is really slow.

    Is there a way to have one read the radio from transmitter to one flash and that flash trip the optical slave of the other two?

    I know you said one or the other, but thinking maybe they could be set separately?

    • Syl Arena says:

      @Malinda: For the fastest recycle times when using an external battery pack, set C.FN-12 to 0 (External + Internal). This will recharge the capacitors (recycle the flash) from both the internal and external power sources. When C.Fn-12 is set to 1, the capacitors are charged from the external batteries only — a bit slower. Under both settings, the circuitry of the Speedlite continues to operate from the internal batteries (which is why you still need batteries in the Speedlite when using an external battery pack).

      No way to set wireless modes separately—where one will relay from radio to optical. The entire 600EX-RT system must run in radio or optical wireless. Radio is definitely the way to go since you already have the gear.

  25. Andrew Potter says:

    Syl, great article. I still love to use a lightmeter so with two 600s (in separate groups) and an ST3, whats the best way to trigger the flashes to get a reading (I can only think of having the camera with me as I take the reading! Thanks. Andrew

    • Syl Arena says:

      Andrew – As far as I know, there is no way to fire Canon’s radio Speedlites from a flashmeter. So, think in terms of ways to fire your camera remotely. Some Canon cameras can be fired with a little IR clicker. And, you could always use the 2- or 10-second shutter delay to give you time to start the camera and then position the flashmeter.

  26. Nick says:

    Excellent post! Thank you for this incredibly easy to follow tutorial. Here’s my question: is there any device out there that I can connect to a 580EXII that will allow me to use the radio signal from the 600EX-RT to trigger one or more 580s as a slave off-camera? Again, using RADIO, not the built-in Optical Wireless IR crap that hardly works.

    Just trying to find a way that I could buy 1 600 & control my existing 580s off camera with the radio function – imagining like a pocket wizard that could attach to the 580s & reads the Canon radio frequency – then voila! Of course I know Canon won’t make this because they make more $$ by forcing us all to upgrade the entire system to radio.


    • Syl Arena says:

      Nick –

      Yongnuo’s YNE3-RX will do exactly as you ask. You slip it onto the hotshoe of your 500-series Speedlite and it can then be controlled via the 600EX-RT’s radio system. As with most Yongnuo products, the user manual is a bit cryptic. So, be prepared to do a bit of research online about how to use it. Price ranges from $50 to $65. Find it here on B&H and here on Amazon

  27. Harry says:

    Hi, I want to buy two units of this. But need some info.. I want to use one unit On-Camera in TTL mode and other OFF-Camera in MANUAL mode. Can i TRIGGER OFF-Camera(Manual mode) from the On-Camera flash wirelessly? as they both are wireless flashes , if not how can i achieve this setup? PLEASE NOTE :On camera TTL and Off camera Manual with Radio wireless control(Not optical). Thanks

  28. Brandon says:

    I have the 600exrt linked to the ste3rt on the hotshoe. Both are Ettl. When I change the fec on the transmitter to say +1 and take a pic, the 600exrt still shows 0. Is this supposed to change

    • Syl Arena says:

      @ Brandon Changes on the master are not shown on the slave until the master fires (which is when it sends the instructions to the slave). So, fire it and then check.

  29. Great post. I have one on camera and one off. I need to change the power of each individually, say on camera ETTL+1 and the off camera one to ETYL-1. Can’t see if this is possible? Sounds like a common situation though no?

    • Found myself an answer whilst playing. Flash on camera is automatically group A but doesn’t display that. Set off camera flash to group B. Use Group mode on master flash and you can adjust shooting styles and levels individually. Brilliant.

    • Syl Arena says:

      Jason – Set the off-camera Speedlite to slave group B. The master is always a member of group A. With the 600s, it’s easier to run the system in Group mode because you then have an individual FEC scale for each group. In regular E-TTL, you have to control the distribution of light via a ratio.

  30. gio says:

    With canon eos 70d. I need to use 600ex in mode out of camera with ETTL.
    Can I control (in ettl mode) the yn600ex in wireless radio?

  31. Jules says:

    Hi Syl

    Thanks you every much for sharing your knowledge.

    I often use the 600ex-rt as master unit and the 430ex III RT as slave, I notice that If I have a FEC set on the master and also a FEC on the slave then both are take into account for flash exposure? Is it a normal behavior? I was thinking that the FEC set on master will override any FEC set on the slave flashes.


  32. Venkat says:

    If my ST-E3-RT master has FEC of -1 dialed in, I don’t see the FEC on the 600EX-RT (slave). If I change the mode from ETTL to Manual on the ST-E3-RT, I see the corresponding changes on the 600EX-RT when the flash fires. But, I never see the FEC changes I make when I am on ETTL – not even when the flash fires. Is there a setting I am missing or do I have to send in my flash for repair? Thanks.

  33. Jonathan says:

    THIS SAVED MY ASS!!!! Thank you for this brilliant, quick and effective tutorial!

  34. Lindsay says:

    Hi Syl, this is an older article but wanted to try to ask a question. I’ve had inconsistent results with my 3 light set up, using the Canon ST-E3-RT transmitter. Sometimes my three Canon 600’s just won’t fire, despite being completely linked to the transmitter. If I trigger the transmitter pilot, all will fire. Then when I press the shutter of my 5d mk3, nothing fires. If I replace the transmitter with a flash, everything works fine. Do you know what would cause flashes to not fire, even if they are linked, on the same channel, same ID… sometimes my setup works flawlessly. But when it doesn’t work I just can’t figure out what’s causing the issue. Thank you for any insight.

    • Syl Arena says:

      Here are some thoughts from my tech guru at Canon:

      “Nothing here really jumps out at me as an obvious problem, although the reader’s descriptions don’t tell us things like the environment she is using this set-up in, how far away the three lights are, and so on. I’ll assume for discussion’s sake that distance and environmental interference (like tons of other radio transmission) isn’t an issue.

      The fact that she says that radio-based firing seems to work fine if a Speedlite is used as a Master unit on-camera leads me to think about the possibility of the following in the ST-E3-RT:

      — Battery issues: have we tried replacing the batteries, even if the transmitter has not sent up a “weak battery” warning on its LCD panel?

      — ST-E3-RT contacts on its foot: Now that these electronic contacts are pointed AND move in a small rotating pattern as you lock it in-place on a hot shoe, we rarely see problems with contacts. However, it cannot hurt to clean both those on the transmitter, and the camera’s hot shoe, with a pencil eraser, and see if that works. (Unrelated WARNING, just because I used the word “eraser:” customers need to know NEVER to use an eraser on the gold-plated contacts at the body lens mount, or those on the back of a Canon lens… I know customer isn’t inquiring about this, but simply want to be clear that just because I suggest a pencil eraser to clean the flash contacts around the hot shoe isn’t a carte blanche to use them on *all* contacts in the camera!)

      — Have we tried this with a different EOS camera body, and same results?

      — Is customer SURE that all off-camera slave units in a radio-driven system have reported to the Master unit that they’re fully recycled? If for whatever reason the on-camera transmitter has not received a fully-recycled signal from EVERY unit in a multi-flash set-up, it will not fire ANY OF THEM until it does — any picture taken before that would be available-light only.”

  35. Steve J says:

    I have a Canon 600 ex II-RT and I sm trying to trigger it using a PocketWizard Plus III. But it isn’t working.

Leave a Reply to Jason kimmings Cancel reply

Your email address will not be published. Required fields are marked *